|
This section and the next three are concerned with the hows, whys and wherefores of the things which are used in kite making and flying. We begin with a few words about tools, of which the following are recommended.
First, a fretsaw, for cutting the small joints which are sometimes used. Second, a small hacksaw, or a small tenon saw, for cutting lengths of wood. Third, for a hammer, use what is called a pin hammer. Other tools include a craft knife with spare blades; a small screwdriver; a small file; a hand drill, with bits up to £ in. diameter; a fretsaw drill or an awl for making nail and screw holes; a small brad punch to drive nails home; a rule; a pair of scissors; a soft-grade pencil; a few assorted paintbrushes. In addition, a woodworker's vice comes in handy, as also do one or two cramps for holding down glued joints.
|
